Toolbar In Charts; Setting Parameters - R&S NRQ6 Getting Started

®
R&S NRQ6
6.2.3

Toolbar in Charts

If you move the mouse into a chart, a toolbar becomes visible in the upper right
corner. Use the toolbar to analyze the chart in detail.
Table 6-1: Icons for chart analysis
Icon Description
Downloads the chart in PNG format.
Zooms into the selected window.
Moves the chart in the direction of both axes.
Enlarges the chart.
Minimizes the chart.
Adjusts the y-axis of the chart constantly to the signal.
To go back to an optimized setting of the y-axis, click
Resets the axes.
6.2.4

Setting Parameters

If a parameter is not grayed, you can change its setting.
To enter quantities with units
The default unit is displayed next to the parameter field, for example:
1. If you enter just a number, the default unit remains.
Example: 2 + [ENTER] -> 2 GHz
2. If you enter the number with a short form of the unit, the short form overrules
the default unit.
Examples:
● 123M + [ENTER] -> 123 MHz
● 1234M + [ENTER] -> 1.234 GHz (= 1234 MHz)
Getting Started 1178.3705.02 ─ 07
Operating Concepts
Browser-Based User Interface
.
45