Table of Contents
Advertisement
®
R&S
NRQ6
The measurement starts, and the result is displayed in dBm.
5. If necessary, perform further settings.
For a detailed description of how to measure in this setup, refer to the user man-
ual of the R&S NRX.
6.4
Remote Control
You can remote control the R&S NRQ6 easily. The change to remote control
occurs "on the fly".
Switching to remote control
1. Establish a link between the controller and the R&S NRQ6.
2. Send a SCPI command to the R&S NRQ6.
The R&S NRQ6 changes into remote mode.
The web user interface is locked and becomes darker. The status is displayed
next to the status LED.
Figure 6-2: Locked web user interface during remote control
Returning to manual operation (local)
► Press [Esc] at the controller keyboard.
Getting Started 1178.3705.02 ─ 07
Operating Concepts
Remote Control
48
Advertisement
Table of Contents
