Super Display Telephone Operation; Interactive Soft Keys; Previous And Prev Soft Keys Renamed; Off-Premise Extensions / On-Premise Slt Extensions - NEC DS1000 Release Notes

Hide thumbs Also See for DS1000:

Table of Contents

DS1000 02.10.12 Release Notes

Enhanced Features in 02.10.12

54 N 02.10.12

Super Display Telephone Operation

To more closely match the key's function, all occurrences of the PREVIOUS (Super Display) and

PREV (2-line display) soft keys have been renamed EXIT.

A single line telephone connected to an analog station port or 2-OPX Module can place their Inter-

com or outside call on Exclusive Hold. (Note that this option does not apply to Voice Mail ports.)

To place your Intercom or outside call on Exclusive Hold

Hookﬂash + Dial *7 .

Hang up.

- If the call is left on Exclusive Hold too long, it will recall to you.

- If you hang up without ﬁrst dialing *7, the call will recall immediately.

- If you previously placed a call on Exclusive Hold or have a Camped-On call waiting, dialing

*7 will answer the waiting call. See Split Available below for more.

To retrieve a call you have placed on Exclusive Hold:

Lift the handset and dial *7 (or hookﬂash).

A single line telephone connected to an analog station port or 2-OPX module can Split (alternate)

between their current call and waiting calls. The waiting calls can include a call you previously placed

on Exclusive Hold or camped-on calls. (Note that this option does not apply to Voice Mail ports.)

To Split (Alternate) between your current call and a waiting call:

Hookﬂash + Dial *7 .

- You are connected to your camped-on call (if any) or the call that has been on Hold the longest.

- Repeat this procedure to cycle through all your waiting calls (from oldest to newest) and return

to your ﬁrst call.

DS1000 Release Notes

Table of Contents