Direct Service Set/Reset - NEC NEAX2400 IMX Features Manual

D-25
General Description
When the Attendant responds to guest calls via the GST or ANSWER key on the Console, or when a call is
answered at the Front Desk Terminal, DIRECT SERVICE is established by pressing the associated set/reset key.
Station number dialing, ENTER and EXIT operations are not required. DIRECT-SERVICE SET/RESET is
available for the following:
AUTOMATIC WAKE-UP
DO NOT DISTURB
MESSAGE WAITING
ROOM CUTOFF
ROOM STATUS
Operating Procedure
The Attendant answers an incoming guest call via the GST or ANSWER key, or the call is answered at the Front
Desk Terminal (guest information is displayed). The guest hangs up after specifying the desired services.
Step
The Attendant presses the desired set/reset function
1
key.
(Note)
Press the CANCL key.
2
Note:
For AUTOMATIC WAKE-UP [A-10], dial required time after Step 1 and press ENTER.
Service Conditions
1. SET/RESET can be established for one or all of these services simultaneously (any combination), prior to
pressing the CANCL key.
a.) The keys on the Attendant Console are shown in
b.) The keys on the Desk Console (with hotel/motel add-on module) are shown in
NEAX2400 IMX Hotel Features and Specifications
NDA-24245, Issue 2

Direct Service Set/Reset

Direct Service Set/Reset
Action
SET
WKUP DND
RESET
WKUP DND
Figure 4 Key Pattern on the Attendant Console
WUS DDS
WUR DDR
Figure 5 Key Pattern on the Desk Console
The associated lamp illuminates.
The connection is terminated.
Figure 4.
CHK
MW RC
CHK
MW RC
OUT
RCS MWS CKIN
RCR MWR CKOUT
[A-10]
[D-11]
[M-6]
[R-9]
[R-10]
Result
AUD
IN
STS
Figure
AUD
STS
D-25
5.
Page 63