22-Button Non-Display Telephone Operation; Super Display Telephone Operation - NEC DS1000 Release Notes

DS1000 Release Notes

22-Button Non-Display Telephone Operation

It is strongly recommended that you use a display telephone when setting up Off Premise Call For-
warding. If you don't have a display telephone, the following procedure explains how you can use a
22-button non-display set to enable Off Premise Call Forwarding.
To set up Call Forwarding Off Premise:
1. Program the number you want Call Forwarding Off Premise to dial into one of your Personal
Speed Dial bins (701-720).
You must do this before proceeding to step 2 below.
For example, the following sequence programs the number 12039265400 with the
name NEC to go out over trunk group 0:
#77 + 701 + HOLD + 90 + HOLD + 12039265400 + HOLD + 62 + 32 + 23 +
HOLD + SPK.
2. Press the ICM key and dial *33 .
3. Dial 2 and enter the Personal Speed bin number you programmed in step 1 above + HOLD .
4. Select the Call Forwarding type:
- Dial 2 or press ALL to forward all calls.
- Dial 8 or press TRNK to forward just trunk calls.
Your DND key flashes.
To cancel Call Forwarding Off Premise:
G
Press the ICM key and dial *30 .
Your DND key goes out.

Super Display Telephone Operation

To set up Call Forwarding Off Premise:
1. Press the ICM key and dial *3
OR
Press PROGRAM + CALL FWRD . You see:
2. Dial 3 or press OFF-PREMISE . You see:
- Press SPEED DIAL BIN to select a Speed Dial bin as your Off Premise Call Forwarding
number.
DS1000 02.10.09 Release Notes
New Features in 02.10.09
7 N 02.10.09