NEC DS1000 Release Notes page 14

DS1000 02.10.09 Release Notes
New Features in 02.10.09
6 N 02.10.09
If you press NUM to store a new number (automatically in Speed Dial bin 720), you see:
- Enter the trunk number (e.g., 1 for trunk 1), trunk group number (e.g., 90 for group 0), or ICM
to store Intercom codes + HOLD .
- Following Speed Dial programming methods, enter the number you want to store (up to 16
digits long, including MIC to store a pause and FLASH to store a Flash) + HOLD to exit.
- You cannot enter a name using this option.
- If you already have a number stored in bin 20, you see:
- Press Yes to enter a new number or No to back up to step 4.
OR
If you pressed VIEW to view your currently stored number, you see:
- Press SPK to exit the VIEW mode.
6. You see:
7. Select the Call Forwarding type:
- Dial 2 or press ALL to forward all calls.
- Dial 8 or press TRNK to forward just trunk calls.
8. Once returning to idle, your telephone display will show:
- FWD OFP indicates that Off Premise Call Forwarding is enabled, followed by the number.
- If you selected a Speed Dial bin with a stored name, the name will display instead.
To cancel Call Forwarding Off Premise:
1. Press the ICM key and dial *3 .
OR
Press CLEAR + PGM + CFWD . You see:
2. Press NONE .
OR
Dial 0 .
OR
Press CLEAR .
3. Off Premise Call Forwarding is cancelled.
DS1000 Release Notes