Programming; Operation - NEC DS1000 Release Notes

DS1000 02.10.09 Release Notes
Enhanced Features in 02.10.09

Programming

Operation

34 N 02.10.09
0101-Enhanced LND
Use this option to enable (Y) or disable (N) Enhanced Last Number Redial. If enabled, the extension
has Enhanced Last Number Redial with the 5 number redial buffer and the enhanced operation. If dis-
abled, the extension has traditional Last Number Redial with a single number redial buffer and the
standard operation. The default for this option is Y (Enhanced Last Number Redial enabled).
1801-Extension Class of Service Assignment
Use this option to assign Class Of Service to extensions.
22-Button and 34-Button Display Telephone Operation
To redial your last call (when Enhanced Last Number Redial is enabled):
If you select a line key before going to step 1, the system automatically outdials your
most recent call when you press LND.
1. Press LND . You see (for example):
The number to the right of the display shows the Last Number Redial record number
(1-5). To return your phone to idle, press LND again.
2. (Optional) Press Vol Up or Vol Down to display the number you want to recall.
3. Press SPK , DIAL or lift the handset to recall the displayed number.
The system tries to use the same trunk as that used for your initial call.
- If that trunk is busy, the system selects a trunk from the same group as your initial call.
- If all trunks are busy, you can dial 2 to leave a Trunk Queue or Trunk Camp On. The
number will automatically redial when the Trunk Queue or Trunk Camp On goes through.
To erase (clear) all the numbers from your Enhanced Last Number Redial buffer:
1. Press LND . You see (for example):
2. Press CLEAR . You see:
3. Press the YES soft key to erase all the numbers in the Last Number Redial buffer and return to
idle.
OR
Press the NO soft key to return to step 1 without erasing the buffer.
DS1000 Release Notes