If You Have A 22-Button Non-Display Telephone - NEC DS1000 Feature Handbook

Call Forwarding Off Premise

If you have a 22-Button Non-Display Telephone

It is strongly recommended that you use a display telephone
when setting up Off Premise Call Forwarding. If you don't
have a display telephone, the following procedure explains
how you can use a 22-button non-display set to enable Off
Premise Call Forwarding.
To set up Call Forwarding Off Premise:
1. Program the number that Call Forwarding Off Premise
should dial into a Personal Speed Dial bin (701-720).
– You must do this before proceeding to step 2 below.
– For example, the following sequence programs the
2. Press
3. Dial
programmed in step 1 above +
4. Select the Call Forwarding type:
– Dial
– Dial
– Your
To cancel Call Forwarding Off Premise:
1. Press
- Your
30
number 12039265400 with the name NEC to go out
over line group 0:
#77 + 701 + HOLD + 90 + HOLD + 12039265400 +
HOLD + 62 + 32 + 23 + HOLD + SPK.
key and dial
and enter the Personal Speed bin number you
to forward all calls.
2
to forward just outside calls.
8
key flashes.
DND
and dial
key goes out.
DND
.
.
HOLD
.