Micro Sd Card - Siemens SIRIUS 3RW51 Equipment Manual

Parameters
Parameter
Local access protection
This menu can only be displayed if a PIN has been defined.
1)
This menu can only be seen after logging in with an active PIN.
2)
Result
With the PIN, you can protect the 3RW5 HMI High Feature from unauthorized access. The menus
of the 3RW5 HMI High Feature can still be viewed, but parameters cannot be changed with local
access protection activated.
The PIN remains even after the power supply has been interrupted.
Note
Reset PIN
You can reset the access protection to the factory setting with the master RESET key on the rear
of the 3RW5 HMI High Feature.
Protect the master RESET key from unauthorized access.
8.12.8

Micro SD card

Operating principle
In combination with a micro SD card, the 3RW5 HMI High Feature can perform firmware updates,
exchange configuration files and service data, and store logbooks.
SIRIUS 3RW51 Soft Starter
Equipment Manual, 09/2020, A5E37108631002A/RS-AC/003
Define PIN
Change PIN
1)
Delete PIN
1)
Automatic Log Off time
1)
Logon 1)
Log out 2)
8.12 3RW5 HMI High Feature
Description
PIN is set up and active.
• Empty (factory setting)
• 4-digit PIN
Existing PIN is changed.
PIN is deactivated and deleted.
• 0 min = deactivated (factory setting)
• Setting range: 0 ... 60 min
Remove the local access protection by logging
on with your 4-digit PIN.
If you issue a control command or want to
change a parameter when access protection is
enabled, you will receive an entry prompt for
the current PIN.
Log out of your current session. Access protec‐
tion is activated again.
Functions
125