Siemens SIRIUS 3RW51 Equipment Manual page 44

Mounting and Dismantling
4.5 Installing / mounting / removing 3RW5 HMI
Procedure for installing the HMI connecting cable
• Use the opening to the cable duct
• It is possible to route the cable up or down in the cable duct.
Make sure that you install the cable in accordance with EMC requirements. For example,
install data cables separately from the motor cable. Connect both sides of shielded cables
over a large surface area.
Procedure for connecting with the HMI connecting cable
44
①
to install the cable in the 3RW51soft starter.
Equipment Manual, 09/2020, A5E37108631002A/RS-AC/003
SIRIUS 3RW51 Soft Starter