Siemens SIRIUS 3RW51 Equipment Manual page 30

Description
3.10 Accessories
Functions
• Any changes of setting elements will be indicated immediately in the display.
• Error diagnostics are output as error numbers (Faults and remedial actions of the 3RW51 soft
starter) (Page 135)
• Acknowledgment of faults and execution of test functions via the RESET / TEST key
• Starting and stopping the motor via control keys
• Switching modes via the LOCAL / REMOTE key
• PROFIBUS station address setting
• Modbus RTU station address setting
• Display of the device LEDs of the 3RW5 HMI Standard shows the messages of the following
devices:
– 3RW51 soft starter
– 3RW5 HMI Standard
– Communication module (if there is one)
3RW5 HMI High Feature (HF)
The 3RW5 HMI High Feature can be used to parameterize, monitor and control (ON / OFF) the
3RW51 soft starter. The 3RW5 HMI High Feature can be installed in the 3RW51 soft starter or in
the control cabinet door or mounted on a wall using accessories. The 3RW5 HMI High Feature
has a TFT color display, LEDs for the status display, and function and control keys.
Functions
• Language selection
• Starting and stopping the motor via control keys
• Display of error diagnoses as plain-text messages
• Display of up to 5 measured values at the same time
• Analog output and ON / RUN relay output can be parameterized with the 3RW5 HMI High
Feature under small load test mode
30
Equipment Manual, 09/2020, A5E37108631002A/RS-AC/003
SIRIUS 3RW51 Soft Starter