Connecting The Control Terminals (Screw Terminals) - Siemens SIRIUS 3RW51 Equipment Manual

Wiring

5.6 Connecting the control terminals (screw terminals)

Assembly procedure
• Plug the new terminal into the main circuit connections
5.6 Connecting the control terminals (screw terminals)
Requirements
• Observe the conductor cross-sections and tightening torques in the data sheet or on the front
of the 3RW51 soft starter beneath the hinged cover.
• Pay attention to the required tools indicated on the front of the 3RW51 soft starter beneath
the hinged cover.
Procedure
Hazardous voltage.
Can cause death or serious injury.
Turn off and lock out all power supplying to this device before working on this device.
64
DANGER
①
.
Equipment Manual, 09/2020, A5E37108631002A/RS-AC/003
SIRIUS 3RW51 Soft Starter