Appendix 7
The functions added to or changed in the safety remote I/O module are shown below.
Added functions
The following table shows the functions that were added to the safety remote I/O module and the versions supporting these
functions.
Details of addition
Ring topology
"Station Information List" window display
*1 The function can be used regardless of the version.
Function changes
The following table shows the functions that were changed in the safety remote I/O module and the versions supporting these
functions.
Details of change
Setting values of the communication cycle
interval setting
Operation in multicast mode
Added and Changed Functions
Firmware
Profile version
version
*1
"02" or later
*1
"02" or later
Firmware version
"02" or later
"02" or later
Reference
Page 55 Network topology setting
Page 104 Checking station information
Reference
Page 54 Communication cycle interval setting
Page 55 Communication mode
Appendix 7 Added and Changed Functions
A
APPX
159