Mitsubishi Electric CC-Link IE-NZ2GNSS2-8D User Manual page 139

Error code area
■Device number
Name
Error code area
■Description
The error code is stored in this area when an error occurs. (Page 118 List of Error Codes)
Errors that occurred in the past can be checked in the error history. (Page 116 Method for Checking Error Codes)
External input monitor area
■Device number
Name
External input monitor area
■Description
The ON/OFF state of external input signals (X) is indicated.
By monitoring the external input signals (X), double discrepancy detection errors can be troubleshooted easily when they
occur.
Use of b15 to b8 is prohibited.
External input monitor X7 to external input monitor X0 are assigned to b7 to b0.
Parameter automatic setting status monitor area
■Device number
Name
Parameter automatic setting status monitor area
■Description
This area stores the parameter automatic setting execution status. Details are provided below.
Parameter automatic setting
execution status
Not executed
Completed successfully (non-volatile
memory updated)
Completed with an error
Completed successfully (non-volatile
memory not updated)
Device number
RWr1
Device number
RWr2
Device number
RWr3
Monitored Description
value
0000H Parameter automatic setting is not executed.
0002H Parameter automatic setting was executed and completed successfully.
The non-volatile memory is updated with the parameters for the parameter automatic setting.
0003H Parameter automatic setting was executed but completed with an error.
0004H Parameter automatic setting was executed and completed successfully.
The non-volatile memory is not updated when parameter automatic setting is performed under
the following conditions where parameter automatic setting is not required or cannot be
performed.
• When the parameters stored in the non-volatile memory are the same as the parameters for
the parameter automatic setting
• When a non-volatile memory data error (parameter) has occurred
APPX
Appendix 3 Remote Register
A
137