Yamaha FLIP-X Series User Manual page 15

(3) Follow the instructions on listed on warning labels and in this manual.
· Be sure to read the warning labels and this manual carefully and make sure you thor-
oughly understand their contents before attempting installation and operation of the ro-
bot.
· Before starting robot operation, be sure to reread the procedures and cautions relating to
your work as well as descriptions in this chapter (Chapter 1, "Using the Robot Safely").
· Never install, adjust, inspect or service the robot in any manner that does not comply with
the instructions in this manual.
· The warning labels 3 (Fig. 1-3) are supplied with the robot and should be affixed to the
robot or conspicuous spots near the robot.
WARNING
Improper installation or operation can result in serious injury or death.
Read the user's manual and all warning labels before operation.
(4) Do not use the robot in environments containing inflammable gas, etc.
WARNING
· This robot was not designed for operation in environments where inflammable or
explosive substances are present.
· Do not use the robot in environments containing inflammable gas, dust or liquids.
Explosions or fire might otherwise result.
(5) Do not use the robot in locations possibly subject to electromagnetic interference, etc.
WARNING
Avoid using the robot in locations subject to electromagnetic interference, electro-
static discharge or radio frequency interference. Malfunctions might otherwise occur.
WARNING
Improper Installation or operation
can result in serious injury or
death. Read user's(owner's)
manual and all warning labels
before operation.
Fig. 1-3 Warning label 3
1-5
Chapter 1 About Safety