Tools Menu; Version - ABB RELION REB500 Operation Manual

1MRK 500 132-UEN B
IEC18000548 V1 EN-US
Figure 58: Installation mode menu
Table 18:
Button
Delete data base in the
protection system
Restart the protection
system
Debug mode
Read Traceability
information
4.9

Tools menu

4.9.1

Version

This menu item is for administering the database for the specific protection system, which
contains information such as settings, event texts, configuration of the binary inputs and
outputs etc. Parts of the database can be edited on the PC using HMI500 and then
downloaded to the protection. The database has a version number and index that are
displayed in the HMI main menu.
Version:
(0...9) and Y (0...9). It is assigned by ABB while processing the contract and determined at the
time the system is accepted by the user. The user cannot change it subsequently.
XX , date of the last change, description The index only comprises letters, that is X {A...Z}.
Index:
The user must change the index and its description if he changes the REB500 settings in order
Distributed busbar protection REB500
Operation manual
Buttons in Installation mode menu
Description
All the data in the protection system are deleted, that is the
project database (MDB file) in the protection system is deleted.
Reinitializes the protection (CU and all BU's)
In the debug mode, the protection system generates additional
internal program events. As a rule, the debug mode is only used by
the ABB engineering department for test purposes.
The system info, the order codes of the central unit and the bay
units (the decoding of the order code is shown in chapter
Ordering for customized IED in the REB500 Product Guide ), the
hardware data (type, serial number, revision index, date of
manufacture etc.) and the software data (version) are uploaded
from the protection equipment and added to the HMI500 report
section (see menu item Tools/Reports/Traceability data).
X . YY , date of the last change, description The version is purely numerical, that is X
© Copyright 2019 ABB. All rights reserved
13000018_2-IEC18000548-1-en.vsdx
GUID-60C6DF97-23F3-45C5-AAF2-F05EC227AB6A v2
Section 4
HMI500
65