ABB RELION REB500 Operation Manual page 25

1MRK 500 132-UEN B
IEC18000489 V1 EN-US
Figure 8:
The name of every item of a plant can be changed by pointing at its symbol and clicking the
right mouse button. This opens the Change label context menu to open the corresponding
dialog box. After entering the new name, click OK to confirm.
Click the button Update Statusor Update Cyclically to show the actual bay measurements and
the state symbols of the configured breakers and isolators.
It is also possible to display the differential currents of the selected busbar zone. Point on the
end of a busbar zone (for example, BZ1) and click the right mouse button to get the
corresponding context menu.
Click the right mouse button in an empty field in the single-line diagram to view a dialog with a
list of the symbols used (see
the default colors for open, closed or invalid objects to suit your needs.
Distributed busbar protection REB500
Operation manual
Typical single-line diagram
Figure
© Copyright 2019 ABB. All rights reserved
9). The buttons on the right provide facility for changing
Section 4
HMI500
12000080-IEC18000489-1-en.vsdx
19