Uninstallation; Starting Hmi500 - ABB RELION REB500 Operation Manual

Section 4
HMI500
During this installation procedure you are requested to read and confirm your acceptance of
the license conditions. The installation program proposes an installation directory. Either
confirm the proposed directory or enter a desired one. Make sure that you have appropriate
access rights to the respective directory. Clicking Next starts the installation. An HMI500
directory and program icon HMI500 x.xxll are created in the Windows start menu,
signifying the program version and
1. Insert the CD-ROM in the drive.
The CD Navigator starts then automatically
2. Should the auto-start function on your PC be disabled, select and run the program
autostart.exe on the CD to start the CD-Navigator.
3. Select the preferred language and enter the HMI500 link, which is placed under the CD-
Navigator section Software.
The software installation procedure should start now.
4.3.2

Uninstallation

1. Open Windows control panel and select Add/remove programs.
2. In the list of programs, select the entry for HMI500 and click OK to remove the program.
4.3.3

Starting HMI500

The first screen to appear after starting the operator program is the System login dialog box:
IEC18000288 V1 EN-US
Figure 2:
12
// the language.
The program screens in this section are based on a typical application.
Depending on the power system configuration and the options configured
while engineering your system, certain menus may be missing or the display
appears different
System login dialog box
© Copyright 2019 ABB. All rights reserved
1MRK 500 132-UEN B
GUID-8325067A-2220-4C77-A398-EF3816BB149C v1
x.xx
GUID-BC60CAA7-94DA-47CC-8E29-384811D8F36E v2
GUID-2084991B-D391-447C-B145-20B9AA6081BC v1
GUID-1F1B41E7-767F-47F9-9E29-8661BD0849E3 v2
15000019-IEC18000288-1-en.vsdx
Distributed busbar protection REB500
Operation manual