Reports; Export Scs Data; Settings; Hmi500 Settings - ABB RELION REB500 Operation Manual

1MRK 500 132-UEN B
4.9.3

Reports

IEC18000504 V1 EN-US
Figure 60: Reports
The Reports dialog box is opened by selecting Reports in the Tools menu. It contains a list of
the various kinds of reports.
Either a desired report can be printed on its own or all the reports can be printed by activating
the Print all reports check box.
The difference between the options in the Printing quality field is that the data are presented
in tabular form if the Normal radio button is active.
Unless a printer is actually installed on the PC, the Reports menu item is grey and inactive. A
printer does not, however, have to be connected.
4.9.4

Export SCS data

This menu item exports any communication data contained in the database. The menu is only
active if under menu Configuration Communication, a SCS interface is configured (see
4.6.1).
In the case of the optional IEC 61850-8-1 and IEC 60870-5-103 communication protocols, the
Export button creates files that can be used to configure the communication interface at the
remote end
4.9.5

Settings

4.9.5.1

HMI500 settings

Some of the operator program functions can be customized.
Distributed busbar protection REB500
Operation manual
© Copyright 2019 ABB. All rights reserved
GUID-F7F7B2DA-519B-442C-986A-0123B50A0185 v1
12000100-IEC18000504-1-en.vsdx
GUID-AF476CDF-FFB6-4386-88EC-017D3A5F9602 v2
GUID-DB508E6C-93A9-4A69-B7AB-1B49379BD4CD v1
GUID-9430004F-C808-43F7-8AFE-A21685142EFE v1
Section 4
HMI500
Section
67