View Menu; Single-Line Diagram - ABB RELION REB500 Operation Manual

Section 4
HMI500
IEC18000488 V1 EN-US
Figure 7:
Table 5:
Dialog Item
Second database is
stored at PC
Second database is
at target
Show only
differences
Limit number of
differences
Show pre-
engineering
changes only for
feeders and
switchgear objects
Write log file
Compare...
4.5

View menu

4.5.1

Single-line diagram

This menu item displays a diagram of the plant corresponding to the layout of the connection
diagrams created by ABB. The screenshot in
diagram.
18
Comparison of system databases
Dialog items of Compare system database
Description
Compares the currently open system database with another database
in the PC, which can be chosen by clicking on Select file....
Compares the currently open system database with the database in
the protection system. For a faster but less detailed check, tick Only
compare checksum.
Limits the scope of the report to the differences actually found.
The number entered here determines the number of differences that
can be found before the current comparison operation is aborted.
When this box is checked (default setting), the comparison is
restricted to determining whether changes have taken place in
relation to the pre-engineering data for bays and switchgear.
Generally, the default settings should be retained as otherwise the
number of differences that will be discovered increases considerably
(events, signals etc., are then also taken into account)
The results of the comparison are stored in a file.
Starts the comparison operation
© Copyright 2019 ABB. All rights reserved
12000079-IEC18000488-1-en.vsdx
Figure 8 shows an example of a single-line
Distributed busbar protection REB500
1MRK 500 132-UEN B
GUID-146BCC01-642D-4972-8FC7-16B550979035 v2
Operation manual