Import Goose Attributes - ABB RELION REB500 Operation Manual

Section 4
HMI500
IEC18000561 V1 EN-US
Figure 37: SCS Data exported
4.6.4.4

Import GOOSE attributes

The Configuration/SCS Configuration/IEC 61850-8-1 options/Import GOOSE data attributes
button opens a file open dialog box. It is used to select the Station Configuration File (SCD),
which has been created by a system engineering tool. GOOSE data attributes, which can be
mapped to REB500 signals, are imported from the Station Configuration File.
IEC18000553 V1 EN-US
Figure 38: Configuration/ SCS Configuration/ IEC 61850-8-1 options
Once the SCD file is imported to the HMI500, the Import GOOSE data attribute button
changes the text label to Delete GOOSE data attributes.
A successful import is indicated by the GOOSE data attributes imported message box. The
number of imported attributes is shown in the box.
46
© Copyright 2019 ABB. All rights reserved
1MRK 500 132-UEN B
15000041-IEC18000561-1-en.vsdx
GUID-510EC409-7A10-4F0D-8755-67B3F52D941B v2
15000028_2-IEC18000553-1-en.vsdx
Distributed busbar protection REB500
Operation manual