Viewing Data On The Local Hmi; Protection Indicator Leds - ABB RELION REB500 Operation Manual

Section 5
Local HMI
see Section
5.3.2

Viewing data on the local HMI

The local HMI provides a quick overview of the status of the protection (normal operation,
alarms and trips) without having to connect a PC.
It is fitted in every central unit and as an option in the bay units. On the front, it has a 320 by
240 pixel display, three protection LEDs, 19 pushbuttons and 15 signalization/alarm LEDs. The
local HMI enable the equipment to be operated and controlled simply and conveniently where
it is installed. An interface is also provided for connecting a PC via RS45.
Whether on the central unit or a bay unit, the local HMI enables the following to be viewed:
• Current and voltage measurements
• Statuses of inputs and outputs
• Alarms (generated by the respective bay unit)
• System (or respective bay unit) settings
• Settings of all the specific bay unit protection functions
IEC18000535 V1 EN-US
Figure 64: Local human-machine-interface (LHMI)
5.3.3

Protection indicator LEDs

There are three LEDs on top of the display: green, yellow, and red.
72
3.
© Copyright 2019 ABB. All rights reserved
1MRK 500 132-UEN B
GUID-AF72C1C6-5E25-40FE-B19B-E864125C01F6 v1
12000146-IEC18000535-1-en.vsdx
GUID-7CDD0038-660F-451B-9001-B016322C63CA v1
Distributed busbar protection REB500
Operation manual