Mechanical Installation; Contents Of This Chapter; Necessary Tools And Instructions; Unpacking And Examining The Delivery - ABB FPTC-02 User Manual

Mechanical installation

Contents of this chapter

This chapter contains a delivery checklist and instructions on installing the module.

Necessary tools and instructions

• Torx screwdriver (T10)
For a complete list of tools, see the applicable drive hardware manual.

Unpacking and examining the delivery

1. Open the option package.
2. Make sure that the package contains:
• FPTC-02 module
• STO cable
• ATEX/UKEX label (with the ATEX/UKEX classification markings)
• this manual.
3. Make sure that there are no signs of damage to the items.

Installing the module

WARNING!
Obey the safety instructions of the drive. If you ignore them, injury or
death, or damage to the equipment can occur. If you are not a qualified
electrical professional, do not do installation, commissioning or
maintenance work.
Install the option module to the drive control unit as follows:
Mechanical installation 25
5
10