Tools Menu; Version - ABB REB500 Operation Manual

Hide thumbs Also See for REB500:

Table of Contents

1MRK 500 124-UEN

3.9

3.9.1

Operation Manual

Distributed busbar protection REB500

Tools menu

This menu item is for administering the database for the specific protection system,

which contains information such as settings, event texts, configuration of the

binary inputs and outputs etc. Parts of the database can be edited on the PC using

HMI500 and then downloaded to the protection. The database has a version

number and index that are displayed in the HMI main menu.

Version:

X.YY, date of the last change, description

The version is purely numerical, i.e. X {0...9} and Y {0...9}. It is assigned by ABB

while processing the contract and determined at the time the system is accepted by

the user. The user cannot change it subsequently.

Index:

XX, date of the last change, description

The index only comprises letters, i.e. X {A...Z}. The user must change the index

and its description if he changes the REB500 settings in order to document and

distinguish different sets of settings. When a new index is assigned, the current

date on the PC is recorded as the date of the last change.

Figure 53

Version

Section 3

HMI500

Table of Contents