SMART Board Installation Manual page 43

7. At the interactive whiteboard, press the circled A on the Display Control icon strip (see
the illustration below).
8. Press the circled B at the right edge of the Display Control icon strip.
NOTE: If you press on a point that's too far from the actual letters on the icon strip,
you'll receive an error message asking you to repeat this procedure.
To disable and remove the Display Control icon strip
1. Press the SMART Board icon in the system tray, and select Control Panel.
2. Select SMART Board Settings.
3. From the Hardware Info & Settings drop-down list, select Set Up Icon Strips.
4. Press Remove All Strips.
5. If you want, peel off the Display Control icon strip from the front of the interactive
whiteboard.
Preparing the Interactive Whiteboard for Use
A
Press this
A A
Press this B
B B
35