SMART Board Installation Manual page 26

18. With the assistance of another person, and while supporting the overlay, loosen the
t-handles on the hanger brackets, carefully slide the overlay toward the flat-panel
display so that the glass rests against the flat-panel display, and then tighten the
t-handles.
CAUTION
19. With the assistance of another person, and while supporting the overlay, loosen both
adjustment handles, vertically adjust the overlay so that you can see all of the
flat-panel display's screen, and then tighten the handles.
18
You could damage the hanger bracket if you push the overlay forward
with too much force. Support the back of the hanger bracket when you
slide the overlay towards it. If this is not possible, slide the overlay as
carefully as you can.
Installing the Interactive Whiteboard
Overlay
T-handles
Hanger Bracket
Flat-Panel Display
Overlay
Adjustment
Handle
Flat-Panel Display