Configuring The Display Control Icon Strip - SMART Board Installation Manual

Configuring the Display Control Icon Strip

The Display Control icon strip is a set of icons that you can use to:
• turn your flat-panel display on and off
• select a different input source (e.g., your computer or, if connected, a VCR or DVD
player)
• select a different screen width
• access the Panel Control menu
NOTE: This functionality is only available with a Microsoft Windows operating system.
The Display Control icon strip is only available for Windows operating system users. If you find
you no longer need it, you can easily disable and remove the strip.
The table below summarizes the function of each icon in the strip.
Press this icon:
Sleep Mode Activation
Input Source Selection
Display Mode Toggle
Panel Control Menu
To configure the Display Control icon strip
1. Connect the flat-panel display to a serial port on your computer (page 27).
2. Configure the On-Screen Display Control for the flat-panel display (page 32).
3. Press the SMART Board icon in the system tray, and select Control Panel.
4. Select SMART Board Settings.
5. From the Hardware Info & Settings drop-down list, select Set Up Icon Strips.
6. Press Display Control Strip.
An orientation screen appears.
34
Input Source Selection
Sleep Mode Activation
The Display Control Icon Strip
Preparing the Interactive Whiteboard for Use
Display Mode Toggle
Panel Control Menu
To do this:
Put the flat-panel display into sleep or standby
mode
Select an input source (e.g., computer, video or
DVD player)
Select a screen width option
Access a menu of audio and video controls for
your flat-panel display