SMART Board Installation Manual page 19

4. With the assistance of another person, carefully remove the flat-panel display from the
wall mount or the stand, and place it facedown on a flat surface.
Flat-Panel Display
NOTE: The appearance of your flat-panel display and its adapter plate may vary from
the diagrams shown in this section. In addition, the number of bolts attaching the
adapter plate to your flat-panel display may be four, six or eight. Some of the figures in
this section show four adapter plate bolts and some show six, but the same steps are
required regardless of the number of bolts.
5. Remove the bolts that attach the adapter plate to the back of the flat-panel display.
Put the bolts in a safe place, as you'll use them later to reattach the adapter plate.
NOTE: The bolt type varies between different flat-panel displays. You may have
received an appropriate tool for removing these bolts with your flat-panel display.
6. Remove the adapter plate.
Adapter Plate
Bolts
Installing the Interactive Whiteboard
Adapter Plate
Adapter Plate Bolts
Adapter Plate
Bolts
11