SMART Board Installation Manual page 16

To prepare the overlay for installation
TIP
1. If your flat-panel display is already installed, check that the flat-panel display and its
wall mount or stand still have all of their hardware, including their screws and bolts.
2. Unpack the components of the interactive whiteboard from its packaging.
3. Place the overlay facedown on a flat surface.
CAUTION
4. Connect one end of the MOD8 cable to the corresponding port on the back of the
overlay. You'll connect the other end later.
8
During the installation, you will need sufficient room on flat surfaces for both a
facedown flat-panel display and a facedown overlay. Clear sufficient space for
yourself before you begin the installation.
You may need assistance when you move the overlay.
MOD8 Cable
Installing the Interactive Whiteboard
Port