Installing The Ap+4 - Zoom 4401 User Manual

Installing the AP+4

This chapter provides basic instructions for connecting the
hardware and configuring the AP+4 using the Setup Wizard. If
you have already done this by following the instructions in the
printed Quick Start, skip to Chapter 2, Wireless Configuration,
on page 20.
AP+4 Back Panel Connectors
Connector Description
WAN This port connects to the LAN or Ethernet port of an
ADSL or cable modem, using an Ethernet cable.
LAN 1 - 4 These Local Area Network ports connect via Ethernet
cable to up to four computers, game consoles or other
network devices.
PWR This port connects to a live power source using the
supplied power cube.
RESET To reset the modem to its factory settings, insert a
paper clip and press and hold for 10 seconds.
6
1
Zoom AP+4 User Guide