Table of Contents
Advertisement
•
If you are using the AP+4 as an Ethernet Client or a
Repeater, at WAN Access Type you should also select
DHCP Client unless you have requested a Static IP
from your Internet Service Provider. If so, select Static
IP and enter the values for IP Address, Subnet Mask,
Default Gateway and DNS Server that you want to use
on your network.
•
If you are setting up a Virtual Private Network (VPN)
select PPTP. (Your ISP will tell you if you need to select
this protocol. Most people don't.)
Click Next to continue.
8
On the Configuring the Wireless Network page, enter your
wireless network parameters.
•
At Band, select the type(s) of devices in your network:
B+G if the network includes both 802.11b and
802.11g devices (default). This option is best for
most users.
B if the network includes only 802.11b devices
Chapter 1. Installing the AP+4
11
Advertisement
Table of Contents
