G if the network includes only 802.11g devices
•
At Wireless Operation, select
AP if you are using the AP+4 as a Router/Access
Point or a Repeater
Client if you are using the AP+4 as an Ethernet
Client
WDS if you want to use the AP+4 as a Repeater in
WDS (Wireless Distribution System) mode.
AP+WDS if you want the AP+4 to operate as both
an Access Point and a Repeater in WDS mode.
•
At Network Type (available only if the AP+4 is operating as
a Client) select Infrastructure (most users) or Ad Hoc.
•
At SSID (Service Set IDentifier), enter a network name. All
wireless devices on your network should use the same
name.
•
At Channel Number (available only if you selected Ad Hoc
channel as your Network Type), select a channel number
that isn't being used by another nearby network. If you are
unsure which channel to use, try Channel 6.
•
Select Enable MAC Clone if for some reason you want to
use the MAC address of a device in the network instead of
the AP+4's MAC address.
•
Enable Universal Repeater Mode (unavailable)
SSID of Extended Interface (unavailable)
Click Next to continue.
12
Zoom AP+4 User Guide