The AP+4 lets you set up firewall protection for your network.
There are several ways you can filter out unwanted
communication to and from the network devices. To access the
filters, in the left menu pane click Firewall.
Port Filtering
This filter can disable a range of ports on the network clients.
Parameter
Select or enter . . .
Enable Port
Select this check box to prevent certain types
Filtering
of data from being sent over the Internet by
computers or other devices in the Local Area
Network.
Port Range
Enter a range of ports to be disabled. Note:
You can enter more than one range, but you
must click Apply Changes after each entry.
50
Firewall Settings
Zoom AP+4 User Guide
6