Table of Contents
Advertisement
Local Site
Select Subnet Address or Single Address
Local IP
Enter 10.0.0.0
Address/Network
Local Subnet
(If Subnet Address is selected) Enter
Mask
255.255.255.0
Remote Site
Select Subnet Address, Single Address,
Any Address, or NAT-T Address
Remote Secure
Enter the WAN IP address of the remote VPN
Gateway
connection.
Remote IP
Enter the LAN IP address or the LAN network
Address/Network
IP address of the remote VPN connection.
Remote Subnet
Enter the Subnet Mask of the remote VPN
Mask
connection.
Local/Peer ID
These four options let you limit use of the VPN
to a single user at each end of the tunnel.
Local ID Type
Select the type of identification entered by the
user at the local site: IP, DNS (URL), or Email.
Local ID
Enter the local user's IP address, URL, or
email address.
Remote ID Type
Select the type of identification entered by the
user at the remote site: IP, DNS (URL), or
Email.
Remote ID
Enter the remote user's IP address, URL, or
email address.
Key Management
Select:
IKE to use Internet Key Exchange Protocol.
Click the Advanced button to configure IKE
(see page 67).
Manual to enter encryption and authentication
keys.
64
Zoom AP+4 User Guide
Advertisement
Table of Contents
