Table of Contents
Advertisement
VPN Setup (Client)
On the main VPN Setup page, select the option button for a
VPN client and then click Edit to open the VPN client setup
page:
Parameter
Select or enter . . .
Enable Tunnel x
Select this check box to enable a VPN tunnel
between the AP+4 and another VPN endpoint.
Note: You can configure multiple tunnels but
you can enable only one at a time.
Connection Name
Enter a client name of your choice.
Auth Type
Select an authentication method:
• PSK, then enter a Pre-Shared Key in the
• RSA if you generated an RSA key on the
Chapter 7. VPN Settings
Key Management section at the bottom of
the page.
main VPN Setup page.
63
Advertisement
Table of Contents
