Setting Up The Ap+4 - Zoom 4401 User Manual

LED Status
PWR
Steady
WLAN Flashing
Steady
WAN Steady
Flashing
LAN 1-4 Steady
ACT Steady
(Activity)
Flashing

Setting Up the AP+4

1
Open your web browser, enter 10.0.0.200 in the address
bar, and press the Enter key to open the Zoom AP+4
configuration software. The Status page appears first.
2
In the left pane, select Setup Wizard.
3
On the Welcome page, click Next.
8
The AP+4 is . . .
connected to a power source
broadcasting its SSID (network name)
not broadcasting its SSID and therefore
not available to wireless devices
seeking a wireless network connection
connected either wirelessly or via
Ethernet cable to a broadband modem
that connects to the Internet
transmitting or receiving data
connected via Ethernet cable to up to
four computers or gaming devices
connected via the associated LAN port
to a computer or other network device
transmitting or receiving data via the
associated LAN port
Zoom AP+4 User Guide