Installing The X7N; To Install The X7N On A Windows Computer, Use The Install Assistant - Zoom X7N User Manual

Installing the X7N

Important! The X7N should be installed near a phone jack with
ADSL service. Ideally it should be located so that it's not too far
from any wireless devices that will communicate with the X7N.
Sometimes it's helpful to set up the X7N at one location, and to
then move it to a location that gives better wireless performance.
Important Safety Measures
To reduce the risk of fire, use the supplied phone cord.
Do not use this product near water — for example, in a
wet basement or next to a swimming pool.
Macintosh and Linux users: please go to page 10.
To Install the X7N on a
Windows Computer, use the
Install Assistant.
1 Turn on the Windows computer that you will use for setup.
This can be any Windows 7, Vista™, XP, 2000, Me or 98
computer with an available Ethernet port.
2 Insert the supplied CD into the CD drive of your computer.
The CD should start automatically.
3 Follow the on-screen prompts for the Install Assistant.
Note to Windows 7 users: You may see a message box that says
your software may not have installed correctly. You can safely
ignore this message box.
Now check that your installation worked by opening a Web
browser and connecting to your favorite web site. If you cannot
connect to the Web, please refer to
Troubleshooting Tips.
Appendix A:
9