Table of Contents
Advertisement
WDS Settings
A Wireless Distribution System (WDS) expands a wireless
network by using multiple Access Points connected wirelessly.
All APs must use the same channel.
To use the AP+4 as a Repeater, on the Wireless Basic Setup
page at the Mode option, select AP+WDS. Then, on the WDS
Settings page, enter the MAC addresses of access points you
are communicating with.
Parameter
Select or enter . . .
Enable WDS
Select the check box to enable WDS.
Add WDS AP
Enter Access Point MAC addresses, one at a
time.
• Click Apply Changes after each entry. The
• Click Reset to clear the current entry before
• Click Set Security to open the Wireless
• Click Show Statistics to display Transmit
28
AP MAC addresses appear one at a time in
the Current WDS AP List.
you apply the change.
Security Setup page and configure
security for the additional AP. The security
method must be the same as on the AP+4.
and Receive information for each
configured AP.
Zoom AP+4 User Guide
Advertisement
Table of Contents
