Zoom 4401 User Manual page 10

5
To have the AP+4's clock automatically updated by an NTP
server, on the Selecting a Time Zone page, select a Time
Zone and an NTP Server, and click Next.
6
If you need to set up or modify your wired local network, use
the LAN Interface Setup page (see page 37 of this manual
for more information).
7
If you want to connect to the Internet, select the method on
the Setting Up Internet Access page.
•
If you are among the great majority of customers who
are using the AP+4 as a Router/Access Point or with a
cable modem, at WAN Access Type select DHCP
Client.
•
If you select DHCP Client and at the end of the
installation process you have not connected successfully
to the Internet, it is possible that you are running PPPoE
software. In that case, at WAN Access Type select
PPPoE (Point-to-Point Protocol over Ethernet). Then
enter the User Name and Password given to you by
your service provider.
10 Zoom AP+4 User Guide