9
On the Setting up Wireless Security page, select an
encryption method to protect your wireless communication.
We strongly recommend that you set up security.
Note: If all the wireless devices on your network use WPA2
or WPA security, you can automatically configure WPA2 or
WPA on each device using the Wi-Fi Protected Setup (WPS)
page on the AP+4 Advanced Setup menu. See page 34.
If you do not choose to use WPS, at Encryption select a
security method.
•
Select WPA2 (AES) if all of the devices in your network
support this method. Note: If you are not sure of the
encryption method, check the documentation that came
with the device(s).
In the Pre-Shared Key Format list, select Passphrase
or Hex (64 characters). We recommend that you select
Passphrase.
In the Pre-Shared Key text box, if you selected
Passphrase, enter a password or sentence. If you
selected Hex, enter up to 64 hexadecimal values.
Enter the Passphrase or Hex string here for future
reference:
— — — — — — — — — — — — — — — — — — —
Chapter 1. Installing the AP+4
13