Zoom 4401 User Manual page 26

WEP Click Set WEP Key and enter the following
information.
Key Length Select an encryption key length of 64 bits or
128 bits (128 bits preferred).
Key Format If all the wireless devices in the network are
Zoom products, select ASCII. Otherwise,
select Hex.
Default Tx Key Select Key 1 as the default key to use for
encryption of transmitted messages.
Encryption If you selected Hex format and you chose a
Key 1 128-bit key length, 26 hexadecimal values are
required. Write the 26-hexadecimal key in the
space below for future reference, and then
enter it in the Key 1 box.
— — — — — — — — — — — — —
— — — — — — — — — — — — —
If you selected Hex format and you chose a
64-bit key length, 13 hexadecimal values are
required. Write the 13-hexadecimal key in the
space below for future reference, and then
enter it in the Key 1 box.
— — — — — — — — — — — — —
If you selected ASCII format, and you chose a
128-bit key length, 13 ASCII characters are
required. Write the 13-ASCII-character key in
the space below for future reference, and then
enter it in the Key 1 box.
— — — — — — — — — — — — —
If you selected ASCII format, and you chose a
64-bit key length, 5 ASCII characters are
required. Write the 5-ASCII-character key in
the space below for future reference, and then
enter it in the Key 1 box.
— — — — —
26 Zoom AP+4 User Guide