SRAM Rockshox SID Service Manual page 66

9 Install the rebound damper knob. Refer to your pre-service recorded Install the rebound damper knob. Refer to your pre-service recorded
rebound setting to adjust the rebound. rebound setting to adjust the rebound.
10 Refer to your pre-service recorded settings to pressurize your air Refer to your pre-service recorded settings to pressurize your air
spring, or use the air chart on the fork's lower leg and pressurize the spring, or use the air chart on the fork's lower leg and pressurize the
air spring. air spring.
You may see a drop in the indicated air pressure on the pump gauge You may see a drop in the indicated air pressure on the pump gauge
while filling the air spring; this is normal. Continue to fill the air spring while filling the air spring; this is normal. Continue to fill the air spring
to the recommended air pressure. to the recommended air pressure.
Cycling the fork will equalize the positive and negative air chambers. Cycling the fork will equalize the positive and negative air chambers.
After the fork is cycled 3-4 times, check the pressure and add air as After the fork is cycled 3-4 times, check the pressure and add air as
needed. needed.
11 Install the air valve cap onto the top cap of the air spring top cap. Install the air valve cap onto the top cap of the air spring top cap.
Ultimate
Select/Select +
Ultimate
Ultimate
Select/Select +
Select/Select +
66
Lower Leg Installation