SRAM Rockshox SID Service Manual page 65

8 Install the black bottom bolt into the spring side Install the black bottom bolt into the
Ultimate: Install the crush washer into the rebound adjuster nut. Install Ultimate: Install the crush washer into the rebound adjuster nut. Install
and tighten the rebound adjuster nut onto the damper side and tighten the rebound adjuster nut onto the
the lower leg. the lower leg.
Select/Select+: Install the red bottom bolt into the Select/Select+: Install the red bottom bolt into the damper side
of the lower leg. of the lower leg.
spring side shaft of the lower leg. shaft of the lower leg.
damper side shaft of shaft of
damper side shaft shaft
5 mm Spring Side
Ultimate: 10 mm Damper Side
Select/Select+: 5 mm Damper Side
5 mm 6.8 N·m (60 in-lb)
10 mm 4 N·m (35 in-lb)
5 mm 6.8 N·m (60 in-lb)
65
Lower Leg Installation