SRAM Rockshox SID Service Manual page 26

7 Remove the seal head from the air shaft. Remove the seal head from the air shaft.
SID: Remove the top out bumper cup, bumper cone, and seal head SID: Remove the top out bumper cup, bumper cone, and seal head
from the air shaft. from the air shaft.
Clean and inspect the shaft for damage. Clean and inspect the shaft for damage.
Scratches on the air spring shaft can cause air to leak. If a scratch is
visible the air spring assembly may need to be replaced.
8 Remove the outer and inner o-rings on the seal head. Remove the outer and inner o-rings on the seal head.
Clean the seal head. Clean the seal head.
Apply grease and install new o-rings. Apply grease and install new o-rings.
NOTI CE
SID SL
SID
SID SL
SID
SID
SID SL
SID
26
DebonAir Spring Service