SRAM Rockshox SID Service Manual page 21

4 Soak the new foam rings in RockShox suspension oil. Install the new Soak the new foam rings in RockShox suspension oil. Install the new
foam rings into the lower leg. foam rings into the lower leg.
5
Remove the outer wire spring from each new wiper seal and set them Remove the outer wire spring from each new wiper seal and set them
aside. aside.
6 SID SL: Use the 32 mm RockShox Dust Seal Installation tool. SID SL: Use the 32 mm RockShox Dust Seal Installation tool.
SID: Use the 35 mm RockShox Dust Seal Installation tool. SID: Use the 35 mm RockShox Dust Seal Installation tool.
Insert the narrow end of a new wiper seal into the recessed end of the Insert the narrow end of a new wiper seal into the recessed end of the
RockShox Dust Seal Installation tool. RockShox Dust Seal Installation tool.
0w-30
SID SL: 32 mm
SID: 35 mm
21
Lower Leg Seal Service