SRAM Rockshox SID Service Manual page 53

4 Clamp the cartridge tube into a vise with Charger vise blocks. Use the Clamp the cartridge tube into a vise with Charger vise blocks. Use the
seal head wrench flats and remove the rebound damper assembly. seal head wrench flats and remove the rebound damper assembly.
5 Remove the seal head from the rebound damper shaft. Remove the seal head from the rebound damper shaft.
Discard the seal head. Discard the seal head.
6 Spray RockShox Suspension Cleaner or isopropyl alcohol into the Spray RockShox Suspension Cleaner or isopropyl alcohol into the
cartridge tube and clean the inside of the tube with a shop towel and a cartridge tube and clean the inside of the tube with a shop towel and a
thin dowel (≤16 mm diameter). thin dowel (≤16 mm diameter).
Inspect the inside of the cartridge tube for scratches. Inspect the inside of the cartridge tube for scratches.
Scratches on the inside surface of the tube can cause oil to leak. If an
internal scratch is visible, the cartridge tube may need to be replaced.
NOTI CE
Vise with Charger Vise Blocks 19 mm
53
Damper Service