SRAM Rockshox SID Service Manual page 38

4 RL R: Install the cable stop collar with the housing guide oriented within
the 10 degree range in the diagram.
The cable stop collar and remote cable housing must clear the lower
leg arch when the fork is fully compressed.
Tighten the set screw. Tighten the set screw.
Install the remote spool with the cable set screw oriented within the Install the remote spool with the cable set screw oriented within the
20 degree range in the diagram. 20 degree range in the diagram.
Tighten the set screw. Tighten the set screw.
200 Hour Service Continue the 200 Hour Service with
NOTI CE
Lower Leg
RL R
1.5 or 2 mm
RL R
2 mm
Installation.
≈10°
0.3 N·m (3 in-lb)
≈20°
RL R
0.3 N·m (3 in-lb)
Charger Race Day Damper Installation
38