SRAM Rockshox SID Service Manual page 19

4 Soak the foam rings in suspension oil. Soak the foam rings in suspension oil.
5 Remove the bottom out cup from the lower leg. Remove the jounce Remove the bottom out cup from the lower leg. Remove the jounce
bumper from the lower leg, if necessary. Clean the inside and outside bumper from the lower leg, if necessary. Clean the inside and outside
of the lower leg. Clean the wiper seals. of the lower leg. Clean the wiper seals.
6 Install the foam rings under the wiper seals. Install the foam rings under the wiper seals.
Confirm the foam rings are installed evenly in the space under the Confirm the foam rings are installed evenly in the space under the
wiper seals and do not protrude over the bushings. wiper seals and do not protrude over the bushings.
Install the wire spring. Install the wire spring.
50 Hour Service Continue the 50 Hour Service with
0w-30
Lower Leg Installation.
19
Lower Leg Service