SRAM Rockshox SID Service Manual page 57

6 Push the rebound damper into the cartridge tube until the rebound Push the rebound damper into the cartridge tube until the rebound
shaft is extended to the A measurement. Do not push the damper into shaft is extended to the A measurement. Do not push the damper into
the tube any further. the tube any further.
Fork travel (mm)
100
120
7 Pour Maxima PLUSH 3wt suspension oil into the tube until the oil is Pour Maxima PLUSH 3wt suspension oil into the tube until the oil is
just below the purge holes. just below the purge holes.
8 Insert the compression damper into the cartridge tube and slowly Insert the compression damper into the cartridge tube and slowly
push it into the tube. The rebound damper will slowly extend as the push it into the tube. The rebound damper will slowly extend as the
compression damper is installed; this is normal. compression damper is installed; this is normal.
Firmly push down and thread the top cap into the tube. Firmly push down and thread the top cap into the tube.
A (mm)
112
92
See Table for Value
PLUSH 3wt
A
57
Damper Assembly