Mate-Displayed Charge Controller Status Meter Screens - Outback Power Systems FlexMax 60 User Manual

MATE-Displayed Charge Controller Status Meter Screens

mode: Silent
in 10.2 vdc
out: 13.4 vdc
DOWN STATUS PORT
STATUS/CC/METER-------P02
charger
amps dc
DOWN UP
STATUS/CC/METER---------P02
CC fi rmware revision
001.008.009
DOWN UP
FLEXmax METER Screens
• mode/pv/in/bat/out: displays the charger mode, the PV array voltage, the incoming PV amps, the
battery voltage, and the outgoing amps to the battery
• charger watts: charger output measured in watts
• charger kwhrs: kilowatt hours produced today by the Charge Controller
• charger amps dc: the amount of amperage the Charge Controller is sending to the battery
• battery voltage: current battery voltage
• panel voltage: current voltage from the PV array
67
P02
STATUS/CC/METER--------P02
0 adc
charger
0 adc
watts
DOWN
STATUS/CC/METER---------P02
+000 adc
battery
voltage
TOP PORT
DOWN
STATUS/CC/METER-----
end of meter menu
TOP PORT
0 w
UP TOP PORT
13.5 vdc
UP TOP PORT
UP TOP STATUS
STATUS/CC/METER-----P02
charger 0.0 kwh
kwhrs
DOWN UP TOP PORT
STATUS/CC/METER--------P02
panel 10.2 vdc
voltage
DOWN UP TOP PORT
STATUS/CC/PAGE 1-------------
MODE METER SETP PG2
Press <SETP> to view the
SETPOINT screens